Lenovo Thinkpad Yoga 260 Repair Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes            

Sections

2

• Back Cover
• 4 steps
• Hard Drive
• 3 steps

Flags

0

• BackLenovo ThinkPad Yoga 260

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Ensure the device is off and unplugged.
• Remove the stylus from its port and set aside.

Ensure the device is off and unplugged.

Remove the stylus from its port and set aside.

1024

Step 2

• Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.
• The screws will not separate from the bottom cover when loose.

Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

The screws will not separate from the bottom cover when loose.

Step 3

• The bottom cover is attached via several plastic clips located around the edges of the bottom cover.
• Using a plastic opening tool, gently pry the bottom cover from the laptop.
• Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

Using a plastic opening tool, gently pry the bottom cover from the laptop.

Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

Step 4

• Place your fingers around the edges of the cover and remove it.

Place your fingers around the edges of the cover and remove it.

Step 5

              Hard Drive               

• Pull back the plastic heat shield over the hard drive without tearing or completely removing it.

Pull back the plastic heat shield over the hard drive without tearing or completely removing it.

Step 6

• Using a Phillips screwdriver, remove the PH1 Phillips fastener and set it aside.

Using a Phillips screwdriver, remove the PH1 Phillips fastener and set it aside.

Step 7

• Using your index finger and thumb, gently pull the hard drive from its connection and remove it from the laptop.

Using your index finger and thumb, gently pull the hard drive from its connection and remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Daniel Fernandez                     

Member since: 02/14/2018

963 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S2-G3, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S2-G3, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S2G3                     


                                            4 Members                     


                                            5 Guides authored