Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Back Cover
  • 4 steps
  • Battery
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackLenovo ThinkPad Yoga 260

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Ensure the device is off and unplugged.
  • Remove the stylus from its port and set aside.

Ensure the device is off and unplugged.

Remove the stylus from its port and set aside.

1024

Step 2

  • Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.
  • The screws will not separate from the bottom cover when loose.

Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

The screws will not separate from the bottom cover when loose.

Step 3

  • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.
  • Using a plastic opening tool, gently pry the bottom cover from the laptop.
  • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

Using a plastic opening tool, gently pry the bottom cover from the laptop.

Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

Step 4

  • Place your fingers around the edges of the cover and remove it.

Place your fingers around the edges of the cover and remove it.

Step 5

              Battery
  • Fold back the plastic cover to access the battery connection.
  • Remove the battery connection using your two index fingers.
  • Gently separate the connectors.

Fold back the plastic cover to access the battery connection.

Remove the battery connection using your two index fingers.

Gently separate the connectors.

Step 6

  • Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside.
  • Lift the battery free from its mounting and remove it.

Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside.

Lift the battery free from its mounting and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors 


                    Daniel Fernandez

Member since: 02/14/2018

963 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S2-G3, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S2-G3, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S2G3                     


                                            4 Members                     


                                            5 Guides authored