Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Back Cover
- 2 steps
- Battery
- 4 steps
Flags
0
BackLenovo ThinkPad Yoga 14 20FY
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the indicated nine M2 x 6 mm nylon-coated screws using a Phillips head screwdriver.
- The screws do not come all the way out. Do not force them out.
Remove the indicated nine M2 x 6 mm nylon-coated screws using a Phillips head screwdriver.
The screws do not come all the way out. Do not force them out.
1024
Step 2
- After removing all of the screws, gently lift up on all covers to remove the back plate and reveal the interior of the device.
After removing all of the screws, gently lift up on all covers to remove the back plate and reveal the interior of the device.
Step 3
Battery
- Locate the battery of the laptop.
Locate the battery of the laptop.
Step 4
- To remove the battery, use a Phillips head screwdriver to unscrew four screws. They are located at the four corners.
To remove the battery, use a Phillips head screwdriver to unscrew four screws. They are located at the four corners.
Step 5
- There will also be a clip that attaches the battery to the rest of the laptop. Unclasp the clip from its holding to completely free the battery.
There will also be a clip that attaches the battery to the rest of the laptop. Unclasp the clip from its holding to completely free the battery.
Step 6
- Once all wires are detached from the rest of the computer, remove the battery from the laptop and replace.
Once all wires are detached from the rest of the computer, remove the battery from the laptop and replace.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 5 other contributors
Jacob Singer
Member since: 04/25/2017
193 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S14-G2, Banghart Spring 2017
Member of Cal Poly, Team S14-G2, Banghart Spring 2017
CPSU-BANGHART-S17S14G2
5 Members
6 Guides authored
Doris Kakulu - May 5, 2019
Reply
What size screwdriver do you need to remove the screws for the back cover?
gilad.nass - Jul 27, 2019
Reply
I did all the steps for removal, but I have a problem with the installation of the new battery. I can’t seem to manage to connect the wires (bundled into the plastic black thingy) back into the compartment from which I released the thingy that was connected to the old battery . In other words, I can’t do the opposite of Step 5 and push it back in. If anyone can post a picture or even a short video of how to insert it back, I would appreciate it. Right now my Laptop says there’s no battery, even though I connected it, so I must be doing something wrong. Thanks. G.
Gowri Shankar Sekar - Sep 1, 2020
Reply
After connecting new battery, system showing as plugged in but the charging light is not glowing? If I replace old battery charging light comes fine! Any idea?