Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Back Case
  • 3 steps
  • Display
  • 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo ThinkPad X390 Yoga

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Use a Phillips #1 screwdriver to unscrew the eight captive screws from the back of the device.
  • The screws should not be removed from the back panel, so don’t try to force them out.

Use a Phillips #1 screwdriver to unscrew the eight captive screws from the back of the device.

The screws should not be removed from the back panel, so don’t try to force them out.

1024

Step 2

  • Use the iFixit opening tool to remove the back case by entering the tip of the tool into the seam and prying up.
  • This can be tough so take your time to undo the clips around the perimeter before removing the back cover.

Use the iFixit opening tool to remove the back case by entering the tip of the tool into the seam and prying up.

This can be tough so take your time to undo the clips around the perimeter before removing the back cover.

Step 3

  • Once the back cover is no longer attached carefully remove it by lifting straight up.

Once the back cover is no longer attached carefully remove it by lifting straight up.

Step 4

              Display
  • Disconnect the display connectors with a spudger or opening tool.

Disconnect the display connectors with a spudger or opening tool.

Step 5

  • Loosen the two 5.5mm screws using the Phillips #1 screwdriver.

Loosen the two 5.5mm screws using the Phillips #1 screwdriver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Andrew Elijah Dezelle

Member since: 10/03/2022

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       The Citadel Military College of South Carolina, Team 5-3, Eggleston Fall 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 5-3, Eggleston Fall 2022 



                    CMCSC-EGGLESTON-F22S5G3                     


                                            3 Members                     


                                            3 Guides authored