Lenovo Thinkpad X390 Yoga Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 - 25 minutes            

Sections

2

• Back Case
• 3 steps
• Battery
• 3 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo ThinkPad X390 Yoga

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before beginning this guide, power off your laptop and unplug it from the charging cord.

What you need

Step 1

              Back Case               

• Use a Phillips #1 screwdriver to unscrew the eight captive screws from the back of the device.
• The screws should not be removed from the back panel, so don’t try to force them out.

Use a Phillips #1 screwdriver to unscrew the eight captive screws from the back of the device.

The screws should not be removed from the back panel, so don’t try to force them out.

1024

Step 2

• Use the iFixit opening tool to remove the back case by entering the tip of the tool into the seam and prying up.
• This can be tough so take your time to undo the clips around the perimeter before removing the back cover.

Use the iFixit opening tool to remove the back case by entering the tip of the tool into the seam and prying up.

This can be tough so take your time to undo the clips around the perimeter before removing the back cover.

Step 3

• Once the back cover is no longer attached carefully remove it by lifting straight up.

Once the back cover is no longer attached carefully remove it by lifting straight up.

Step 4

              Battery               

• Use the spudger to disconnect the battery from the motherboard at the connector socket.

Use the spudger to disconnect the battery from the motherboard at the connector socket.

Step 5

• Use the Phillips #1 screwdriver to remove five 4 mm screws around the battery.

Use the Phillips #1 screwdriver to remove five 4 mm screws around the battery.

Step 6

• Lift the battery out of the laptop by lifting up.

Lift the battery out of the laptop by lifting up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Tanner Baine                     

Member since: 09/03/2021

423 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       University of Alabama, Team 1-2, Bedsole Fall 2021                        

                                                  Member of University of Alabama, Team 1-2, Bedsole Fall 2021 



                    UA-BEDSOLE-F21S1G2                     


                                            4 Members                     


                                            6 Guides authored