Lenovo Thinkpad X390 Battery Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          7 - 10 minutes            

Sections

2

• Back Cover
• 2 steps
• Battery
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo ThinkPad X390

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Turn off and power down the laptop before proceeding with the guide.
• Flip your laptop over and place on a flat surface so you can access the screws on the base cover.
• Using a Phillips #0 screwdriver, unscrew the five screws on the base cover.
• The screws are not removable.

Turn off and power down the laptop before proceeding with the guide.

Flip your laptop over and place on a flat surface so you can access the screws on the base cover.

Using a Phillips #0 screwdriver, unscrew the five screws on the base cover.

The screws are not removable.

1024

Step 2

• Remove the base cover by inserting a plastic opening tool in between the cover and the rest of the laptop.
• Once the tool is inserted, slide the tool along the edges of the case and push down on the opening tool to detach the case.
• You may need to move the tool to different locations to fully release the back cover.

Remove the base cover by inserting a plastic opening tool in between the cover and the rest of the laptop.

Once the tool is inserted, slide the tool along the edges of the case and push down on the opening tool to detach the case.

You may need to move the tool to different locations to fully release the back cover.

Step 3

              Battery               

• Using tweezers, unplug the battery from the laptops motherboard by pulling on the cable that attaches it.

Using tweezers, unplug the battery from the laptops motherboard by pulling on the cable that attaches it.

Step 4

• Using a Phillips #0 screwdriver, remove the four 5.2 mm screws holding the battery in place.

Using a Phillips #0 screwdriver, remove the four 5.2 mm screws holding the battery in place.

Step 5

• Using your hands, remove the battery from the laptop.

Using your hands, remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Curtis Kubacka                     

Member since: 09/28/2021

219 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Clemson, Team 5-1, Hunter Fall 2021                        

                                                  Member of Clemson, Team 5-1, Hunter Fall 2021 



                    CLEM-HUNTER-F21S5G1                     


                                            5 Members                     


                                            4 Guides authored