Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackLenovo Thinkpad X201 Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Remove the battery by sliding forward the switch here.
- For more info on how to remove the battery, refer to battery replacement guide.
Remove the battery by sliding forward the switch here.
For more info on how to remove the battery, refer to battery replacement guide.
1024
Step 2
- The RAM is the small square component on the back. Unscrew all screws using a diamond head screw.
- There are only two screws to remove as circled here.
- The screw head used here is a JIS J00 Driver.
The RAM is the small square component on the back. Unscrew all screws using a diamond head screw.
There are only two screws to remove as circled here.
The screw head used here is a JIS J00 Driver.
Step 3
- On the edges of the RAM components, push each switch to the side.
- The RAM chip should pop up on its own once you push each side outwards.
On the edges of the RAM components, push each switch to the side.
The RAM chip should pop up on its own once you push each side outwards.
Step 4
- The RAM chip should pop up on its own once the sides are pushed outwards.
- Gently pull on the RAM to remove.
The RAM chip should pop up on its own once the sides are pushed outwards.
Gently pull on the RAM to remove.
Step 5
- Remove the RAM from the device.
Remove the RAM from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Peter Gachuki
Member since: 03/26/2018
642 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S5-G7, Peak Spring 2018
Member of UMass Dartmouth, Team S5-G7, Peak Spring 2018
UMASSD-PEAK-S18S5G7
3 Members
12 Guides authored