Difficulty

Easy

Steps

6

Time Required

                          3 - 5 minutes            

Sections

2

  • Back Panel
  • 3 steps
  • Hard Drive
  • 3 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackLenovo ThinkPad X140e

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Flip the laptop upside down so that the battery is facing away from you.
  • Battery removal is not necessary to complete this guide.

Flip the laptop upside down so that the battery is facing away from you.

Battery removal is not necessary to complete this guide.

1024

Step 2

  • Locate the three 3 mm Phillips #0 screws on the back panel.
  • Remove each screw using a small Phillips #0 screwdriver.

Locate the three 3 mm Phillips #0 screws on the back panel.

Remove each screw using a small Phillips #0 screwdriver.

Step 3

  • Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.

Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.

Step 4

              Hard Drive               
  • After removing the back panel, locate the hard drive located to the far left. It is distinguishable from other parts based on it’s rectangular shape.

After removing the back panel, locate the hard drive located to the far left. It is distinguishable from other parts based on it’s rectangular shape.

Step 5

  • Remove the four 3.5 mm Phillips #0 screws attached on the four corners of the hard drive.

Remove the four 3.5 mm Phillips #0 screws attached on the four corners of the hard drive.

Step 6

  • Slide the hard drive to the left.
  • Grip the hard drive on both sides and proceed to lift up to remove the hard drive.

Slide the hard drive to the left.

Grip the hard drive on both sides and proceed to lift up to remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    kevin hull                     

Member since: 10/05/2016

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 20-5, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 20-5, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S20G5                     


                                            4 Members                     


                                            5 Guides authored                     

amwindham - Nov 22, 2021

Reply

How do you reformat the hard-drive? I understand physically replacing the equipment, but how do I reformat it with a windows operating system? My email is amwindham@aol.com.