Difficulty
Easy
Steps
9
Time Required
8 minutes
Sections
4
- Back Cover
- 1 step
- Speakers
- 3 steps
- Battery
- 2 steps
- Trackpad
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo ThinkPad X1 Yoga (1st Gen)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Be sure to power off and unplug your device before you begin your repair.
- Flip the computer over so the bottom is facing up.
- Remove nine 4mm Phillips #1 screws from the bottom of the computer.
- Use an iFixit opening tool to pry the back cover off of the laptop.
Be sure to power off and unplug your device before you begin your repair.
Flip the computer over so the bottom is facing up.
Remove nine 4mm Phillips #1 screws from the bottom of the computer.
Use an iFixit opening tool to pry the back cover off of the laptop.
1024
Step 2
Speakers
- Remove the five 4.5mm Phillips #1 screws that secure the battery.
Remove the five 4.5mm Phillips #1 screws that secure the battery.
Step 3
- Using a pair of tweezers, push the sides of the white speaker wire toward the battery (where it says Lenovo) to unplug it.
Using a pair of tweezers, push the sides of the white speaker wire toward the battery (where it says Lenovo) to unplug it.
Step 4
- Remove the speakers from either side of the battery. The connecting wire will unthread from the sides of the battery.
Remove the speakers from either side of the battery. The connecting wire will unthread from the sides of the battery.
Step 5
Battery
- Lift the plastic black strip cover that’s laying over the battery connector.
- Use the iFixit opening tool to flip up and disconnect the black battery connector from its motherboard socket.
- Gently pull the connector away from the battery to pull it out of the slot.
Lift the plastic black strip cover that’s laying over the battery connector.
Use the iFixit opening tool to flip up and disconnect the black battery connector from its motherboard socket.
Gently pull the connector away from the battery to pull it out of the slot.
Step 6
- Lift and remove the battery away from the computer.
Lift and remove the battery away from the computer.
Step 7
Trackpad
- Using the Phillips #1 screwdriver, remove four 4.5 mm screws from the trackpad.
Using the Phillips #1 screwdriver, remove four 4.5 mm screws from the trackpad.
Step 8
- Using the iFixit opening tool, flip up the small covers to the track pad cable connectors.
- Gently pull the cable out of place.
Using the iFixit opening tool, flip up the small covers to the track pad cable connectors.
Gently pull the cable out of place.
Step 9
- Using iFixit opening tools, lift up the frame of the track pad.
- Gently remove the track pad away from the computer.
Using iFixit opening tools, lift up the frame of the track pad.
Gently remove the track pad away from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Emily Perkins
Member since: 02/20/2020
285 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
The Citadel Military College of South Carolina, Team S3-G16, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S3-G16, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S3G16
3 Members
4 Guides authored