Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Back Cover
- 1 step
- Cooling Fan
- 4 steps
Flags
0
BackLenovo ThinkPad X1 Yoga (1st Gen)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
After Step 4, you will need to reapply thermal paste. Please refer to this guide on how to do that.
What you need
Step 1
Back Cover
- Be sure to power off and unplug your device before you begin your repair.
- Flip the computer over so the bottom is facing up.
- Remove nine 4mm Phillips #1 screws from the bottom of the computer.
- Use an iFixit opening tool to pry the back cover off of the laptop.
Be sure to power off and unplug your device before you begin your repair.
Flip the computer over so the bottom is facing up.
Remove nine 4mm Phillips #1 screws from the bottom of the computer.
Use an iFixit opening tool to pry the back cover off of the laptop.
1024
Step 2
Cooling Fan
- Remove four 4.5mm Phillips #1 screws from the corners of the heat sink.
Remove four 4.5mm Phillips #1 screws from the corners of the heat sink.
Step 3
- Gently peel back the black plastic covering around the fan.
- You may hear or feel the adhesive pulling away here.
- Using an iFixit opening tool, flip up the small black cover of the fan plug.
Gently peel back the black plastic covering around the fan.
You may hear or feel the adhesive pulling away here.
Using an iFixit opening tool, flip up the small black cover of the fan plug.
Step 4
- Using tweezers, pull the plastic strip out.
Using tweezers, pull the plastic strip out.
Step 5
- Remove the fan from the computer.
Remove the fan from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Katrina Ternus
Member since: 09/07/2019
383 Reputation
2 Guides authored
Badges:
13
+10 more badges
Team
Embry-Riddle Aeronautical University, Team S22-G6, Branham Fall 2019
Member of Embry-Riddle Aeronautical University, Team S22-G6, Branham Fall 2019
ERAU-BRANHAM-F19S22G6
3 Members
17 Guides authored