Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
2
- Base Panel
- 1 step
- SSD
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo ThinkPad X1 Yoga (6th Gen)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Panel
- Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.
- Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
- Lift the base panel up and off of the chassis.
Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.
Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
Lift the base panel up and off of the chassis.
1024
Step 2
SSD
- Use a Phillips #1 screwdriver to remove the two 2.2 mm screws securing the copper plate over the SSD.
- Lift the copper plate up and out.
Use a Phillips #1 screwdriver to remove the two 2.2 mm screws securing the copper plate over the SSD.
Lift the copper plate up and out.
Step 3
- Gently lift up on the left side of the SSD, then pull it to the left to remove it from its socket.
Gently lift up on the left side of the SSD, then pull it to the left to remove it from its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Taylor Morgan
Member since: 02/15/2022
521 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
Western Carolina University, Team 1-1, Virtue Spring 2022
Member of Western Carolina University, Team 1-1, Virtue Spring 2022
WCU-VIRTUE-S22S1G1
4 Members
5 Guides authored