Lenovo Thinkpad X1 Yoga 6Th Gen Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          40 minutes - 1 hour            

Sections

3

• Base Panel
• 1 step
• Battery
• 1 step
• Speaker
• 3 steps

Flags

0

• BackLenovo ThinkPad X1 Yoga (6th Gen)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Panel               

• Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.
• Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
• Lift the base panel up and off of the chassis.

Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.

Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.

Lift the base panel up and off of the chassis.

1024

Step 2

              Battery               

• Use a Phillips #1 screwdriver to remove the five 4.5 mm screws securing the battery.
• Lift the battery up and out.

Use a Phillips #1 screwdriver to remove the five 4.5 mm screws securing the battery.

Lift the battery up and out.

Step 3

              Speaker               

• Use a Phillips #1 screwdriver to remove the four 1.8 mm screws.

Use a Phillips #1 screwdriver to remove the four 1.8 mm screws.

Step 4

• Use the spudger to lift the flap covering the speaker wire.
• Starting at the top of the right speaker, follow the wire connected to the top of the left speaker. Use the tip of a spudger to free the wire from the plastic brackets it lies under.
• Starting from near the bottom-left side of the right speaker, follow the lower wire, unseating the speaker cable as you go.

Use the spudger to lift the flap covering the speaker wire.

Starting at the top of the right speaker, follow the wire connected to the top of the left speaker. Use the tip of a spudger to free the wire from the plastic brackets it lies under.

Starting from near the bottom-left side of the right speaker, follow the lower wire, unseating the speaker cable as you go.

Step 5

• Place your fingernails behind each of the plastic tabs on the speaker’s plug and pull directly backwards until the plug releases from its port.
• Lift the speakers up and out.

Place your fingernails behind each of the plastic tabs on the speaker’s plug and pull directly backwards until the plug releases from its port.

Lift the speakers up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Taylor Morgan                     

Member since: 02/15/2022

521 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Western Carolina University, Team 1-1, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G1                     


                                            4 Members                     


                                            5 Guides authored