Difficulty

Moderate

Steps

3

Time Required

                          5 - 10 minutes            

Sections

2

  • Base Panel
  • 1 step
  • Fan
  • 2 steps

Flags

0

  • BackLenovo ThinkPad X1 Yoga (6th Gen)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base Panel               
  • Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.
  • Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
  • Lift the base panel up and off of the chassis.

Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.

Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.

Lift the base panel up and off of the chassis.

1024

Step 2

              Fan               
  • Use a Phillips #000 screwdriver to loosen the four 5 mm captive screws.
  • The captive screws will stay attached to the fan as you remove it.

Use a Phillips #000 screwdriver to loosen the four 5 mm captive screws.

The captive screws will stay attached to the fan as you remove it.

Step 3

  • Place the pointed tip of a spudger behind the small plastic tab on either side, and “walk” the fan’s connector out of its port, alternating between tabs, until the plug disconnects.
  • Lift the fan up and out.

Place the pointed tip of a spudger behind the small plastic tab on either side, and “walk” the fan’s connector out of its port, alternating between tabs, until the plug disconnects.

Lift the fan up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Taylor Morgan                     

Member since: 02/15/2022

521 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Western Carolina University, Team 1-1, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G1                     


                                            4 Members                     


                                            5 Guides authored                     

hamedabedi - Nov 25, 2022

Reply

Hi, Do you know what is the fan part number? Where did you get the fan from?