Lenovo Thinkpad X1 Yoga 6Th Gen Coin Cell Battery Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

3

• Base Panel
• 1 step
• Battery
• 1 step
• Coin Cell Battery
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo ThinkPad X1 Yoga (6th Gen)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Panel               

• Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.
• Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
• Lift the base panel up and off of the chassis.

Use a Phillips #1 screwdriver to remove the five 5.0 mm screws from the base panel.

Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.

Lift the base panel up and off of the chassis.

1024

Step 2

              Battery               

• Use a Phillips #1 screwdriver to remove the five 4.5 mm screws securing the battery.
• Lift the battery up and out.

Use a Phillips #1 screwdriver to remove the five 4.5 mm screws securing the battery.

Lift the battery up and out.

Step 3

              Coin Cell Battery               

• Use a spudger to pry the coin cell battery until it releases from the chassis.
• There is an adhesive holding the battery in place; patiently pry around the coin cell until it releases from the housing, and don’t use excessive force.

Use a spudger to pry the coin cell battery until it releases from the chassis.

There is an adhesive holding the battery in place; patiently pry around the coin cell until it releases from the housing, and don’t use excessive force.

Step 4

• Use a spudger to “walk” out the coin cell’s plug from its motherboard port, gently levering from each side until it releases.
• Lift the coin cell battery out.

Use a spudger to “walk” out the coin cell’s plug from its motherboard port, gently levering from each side until it releases.

Lift the coin cell battery out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Taylor Morgan                     

Member since: 02/15/2022

521 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Western Carolina University, Team 1-1, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-1, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G1                     


                                            4 Members                     


                                            5 Guides authored