Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

2

  • Back Cover
  • 1 step
  • Speakers
  • 2 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackLenovo ThinkPad X1 Gen 1 Extreme

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover               
  • Power off and unplug your device before you begin.
  • Orient the laptop so that it is bottom up, and the trackpad is closest to you.
  • Unscrew the seven captive screws with a Phillips #00 screwdriver.
  • These screws will loosen, but stay attached to the cover. Do not attempt to completely remove them.
  • Slide a blue opening pick in the gap between the bottom panel and chassis, and pry off the one clip on each side.
  • Remove the back cover from the device.

Power off and unplug your device before you begin.

Orient the laptop so that it is bottom up, and the trackpad is closest to you.

Unscrew the seven captive screws with a Phillips #00 screwdriver.

These screws will loosen, but stay attached to the cover. Do not attempt to completely remove them.

Slide a blue opening pick in the gap between the bottom panel and chassis, and pry off the one clip on each side.

Remove the back cover from the device.

1024

Step 2

              Speakers               
  • Use a Phillips #00 head screwdriver to remove the four 4 mm screws above the battery.

Use a Phillips #00 head screwdriver to remove the four 4 mm screws above the battery.

Step 3

  • Lift the speaker modules on either side of the battery out of its pegs, and unwind the cable from the front of the battery.
  • Set the speaker modules out of the way.

Lift the speaker modules on either side of the battery out of its pegs, and unwind the cable from the front of the battery.

Set the speaker modules out of the way.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Kristen Gismondi                     

Member since: 11/12/2014

69,397 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored