Difficulty

Easy

Steps

3

Time Required

                          15 - 20 minutes

Sections

2

  • Back Cover
  • 1 step
  • RAM
  • 2 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLenovo ThinkPad X1 Gen 1 Extreme

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The steps to replace the RAM card are simple, the hardest part being keeping track of all the screws while taking apart the device.

It is important to remember to turn off the device while replacing the RAM card.

What you need

Step 1

              Back Cover
  • Power off and unplug your device before you begin.
  • Orient the laptop so that it is bottom up, and the trackpad is closest to you.
  • Unscrew the seven captive screws with a Phillips #00 screwdriver.
  • These screws will loosen, but stay attached to the cover. Do not attempt to completely remove them.
  • Slide a blue opening pick in the gap between the bottom panel and chassis, and pry off the one clip on each side.
  • Remove the back cover from the device.

Power off and unplug your device before you begin.

Orient the laptop so that it is bottom up, and the trackpad is closest to you.

Unscrew the seven captive screws with a Phillips #00 screwdriver.

These screws will loosen, but stay attached to the cover. Do not attempt to completely remove them.

Slide a blue opening pick in the gap between the bottom panel and chassis, and pry off the one clip on each side.

Remove the back cover from the device.

1024

Step 2

              RAM
  • Use an opening tool to unlatch the silver gate on the side of the RAM by pushing it away from the component.
  • Repeat the same process to the other side of the RAM.

Use an opening tool to unlatch the silver gate on the side of the RAM by pushing it away from the component.

Repeat the same process to the other side of the RAM.

Step 3

  • Gently grab the RAM and slide it up and away from the connector at the bottom of the component.

Gently grab the RAM and slide it up and away from the connector at the bottom of the component.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Addy Botao Liu

Member since: 02/21/2021

253 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S2-G17, Eggleston Spring 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G17, Eggleston Spring 2021 



                    CMCSC-EGGLESTON-S21S2G17                     


                                            3 Members                     


                                            3 Guides authored