Difficulty

Easy

Steps

3

Time Required

                          20 minutes

Sections

1

  • Thermal Paste
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLenovo ThinkPad X1 Carbon 9th Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Opening the laptop
  • Unscrew the 5 screws holding the back panel in place.
  • Use a plastic prying tool to release all the clips holding the panel in place.
  • It is recommended to disconnect the battery.
  • Once you opened the back cover, it is a good idea to upgrade the SSD if you want.
  • It is also recommended to use compressed air to remove any dust in the laptop and the fan.

Unscrew the 5 screws holding the back panel in place.

Use a plastic prying tool to release all the clips holding the panel in place.

It is recommended to disconnect the battery.

Once you opened the back cover, it is a good idea to upgrade the SSD if you want.

It is also recommended to use compressed air to remove any dust in the laptop and the fan.

1024

Step 2

              Changing the thermal paste
  • Unscrew the 4 screws holding the CPU heatsink and disconnect the fan.
  • Clean the old thermal paste both from the cooler and the CPU. It is best to use isopropyl alcohol and cotton swabs or paper towel, but be careful not to go too hard on the CPU.

Unscrew the 4 screws holding the CPU heatsink and disconnect the fan.

Clean the old thermal paste both from the cooler and the CPU. It is best to use isopropyl alcohol and cotton swabs or paper towel, but be careful not to go too hard on the CPU.

Step 3

              Applying new thermal paste
  • Dont use too much thermal paste, just enough to cover some portion of the pad. If you have a spreader, use it. The thermal paste will apply evenly after you tighten the heatsink.
  • Last, put the heatsink back carefully and tighten the screws in order 1 -> 4 to ensure even pressure. Dont forget to plug in the fan cable.

Dont use too much thermal paste, just enough to cover some portion of the pad. If you have a spreader, use it. The thermal paste will apply evenly after you tighten the heatsink.

Last, put the heatsink back carefully and tighten the screws in order 1 -> 4 to ensure even pressure. Dont forget to plug in the fan cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Simeon Brankov

Member since: 11/08/2020

3,455 Reputation

                                      41 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges