Difficulty

Moderate

Steps

5

Time Required

                          1 minute

Sections

3

  • Back Cover
  • 2 steps
  • Battery
  • 2 steps
  • Speaker
  • 1 step

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo ThinkPad X1 Carbon 6th Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Use a Phillips #0 screwdriver to unscrew the five screws that secure the back cover to the laptop.
  • The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

Use a Phillips #0 screwdriver to unscrew the five screws that secure the back cover to the laptop.

The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

1024

Step 2

  • Use a Jimmy to lift the cover directly up off of the locating pins.
  • Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.
  • Remove the back cover.
  • If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

Use a Jimmy to lift the cover directly up off of the locating pins.

Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.

Remove the back cover.

If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

Step 3

              Battery
  • Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.

Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.

Step 4

  • Take out the battery by lifting it from the bottom edge of the laptop, and then pulling away from the motherboard.

Take out the battery by lifting it from the bottom edge of the laptop, and then pulling away from the motherboard.

Step 5

              Speaker
  • Use a PH0 screwdriver to remove the four 2mm screws holding the speakers in place.

Use a PH0 screwdriver to remove the four 2mm screws holding the speakers in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Aaron J Houston

Member since: 10/03/2022

73 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team 1-8, Eggleston Fall 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 1-8, Eggleston Fall 2022 



                    CMCSC-EGGLESTON-F22S1G8                     


                                            3 Members                     


                                            3 Guides authored