Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes

Sections

3

  • Back Cover
  • 2 steps
  • Battery
  • 2 steps
  • Fingerprint Scanner
  • 3 steps

Flags

0

  • BackLenovo ThinkPad X1 Carbon 6th Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Use a Phillips #0 screwdriver to unscrew the five screws that secure the back cover to the laptop.
  • The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

Use a Phillips #0 screwdriver to unscrew the five screws that secure the back cover to the laptop.

The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

1024

Step 2

  • Use a Jimmy to lift the cover directly up off of the locating pins.
  • Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.
  • Remove the back cover.
  • If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

Use a Jimmy to lift the cover directly up off of the locating pins.

Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.

Remove the back cover.

If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

Step 3

              Battery
  • Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.

Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.

Step 4

  • Take out the battery by lifting it from the bottom edge of the laptop, and then pulling away from the motherboard.

Take out the battery by lifting it from the bottom edge of the laptop, and then pulling away from the motherboard.

Step 5

              Fingerprint Scanner
  • Use the Phillips #0 screwdriver to remove the 2mm screw that secures the cover of the fingerprint scanner.

Use the Phillips #0 screwdriver to remove the 2mm screw that secures the cover of the fingerprint scanner.

Step 6

  • Remove the cover by grabbing it and gently pulling up and to the left.

Remove the cover by grabbing it and gently pulling up and to the left.

Step 7

  • Use a nylon spudger to lift up the black bar that secures the cable.
  • Disconnect the ribbon cable from the fingerprint scanner by pulling the cable directly out.

Use a nylon spudger to lift up the black bar that secures the cable.

Disconnect the ribbon cable from the fingerprint scanner by pulling the cable directly out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Michael Megna

Member since: 01/23/2020

1,123 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team S19-G4, White Winter 2020                        

                                                  Member of Cal Poly, Team S19-G4, White Winter 2020 



                    CPSU-WHITE-W20S19G4                     


                                            3 Members                     


                                            20 Guides authored