Lenovo Thinkpad X1 Carbon 2Nd Gen Speakers Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          5 - 15 minutes            

Sections

3

• Back Cover
• 2 steps
• Battery
• 3 steps
• Speakers
• 4 steps

Flags

0

• BackLenovo ThinkPad X1 Carbon 2nd Gen

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The speakers play the audio from your computer.

Before using this guide, check if your audio has been disabled or you need to update the audio drivers. This will check if your speaker problems are from faulty software or hardware.

Before you begin, make sure your computer is off.

What you need

Step 1

              Back Cover               

• Using a Phillips #0 screwdriver, remove the seven 7mm screws holding the back cover onto your computer.

Using a Phillips #0 screwdriver, remove the seven 7mm screws holding the back cover onto your computer.

1024

Step 2

• Use a plastic opening tool or your fingers to pry off the cover.

Use a plastic opening tool or your fingers to pry off the cover.

Step 3

              Battery               

• Using your fingers, disconnect the battery from the motherboard.

Using your fingers, disconnect the battery from the motherboard.

Step 4

• Using a Phillips #0 screwdriver, unscrew the five 4.3mm screws attaching the battery to the computer.

Using a Phillips #0 screwdriver, unscrew the five 4.3mm screws attaching the battery to the computer.

Step 5

• Remove the battery by pulling it directly towards you.

Remove the battery by pulling it directly towards you.

Step 6

              Speakers               

• Use a Phillips #0 screwdriver to remove the four 4.6mm screws holding the speakers.
• Each speaker has 2 screws.

Use a Phillips #0 screwdriver to remove the four 4.6mm screws holding the speakers.

Each speaker has 2 screws.

Step 7

• Disconnect the wire running from the right speaker to the motherboard.

Disconnect the wire running from the right speaker to the motherboard.

Step 8

• Remove the tape that is holding down the wire that connects the two speakers.

Remove the tape that is holding down the wire that connects the two speakers.

Step 9

• Remove the speakers by lifting them directly upward.

Remove the speakers by lifting them directly upward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Eevee Murdock                     

Member since: 01/23/2020

1,002 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team S18-G4, White Winter 2020                        

                                                  Member of Cal Poly, Team S18-G4, White Winter 2020 



                    CPSU-WHITE-W20S18G4                     


                                            4 Members                     


                                            7 Guides authored