Difficulty
Difficult
Steps
11
Time Required
40 minutes
Sections
1
- broken key lock
- 11 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLenovo ThinkPad Ultra Dock
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
broken key lock
- Remove all marked screws and keep them save
- The colors of the screws might be exchanged
- For best results please remind yourself which screws you removed from where
Remove all marked screws and keep them save
The colors of the screws might be exchanged
For best results please remind yourself which screws you removed from where
1024
Step 2
- Remove also those screws
Remove also those screws
Step 3
- lift the cover carefully till the clips snap out
- remove the cover completely by trying to pull it downwards
- The right clip on top might be a little hard to pop out: So be careful! It might help if you remove all the other clips first
lift the cover carefully till the clips snap out
remove the cover completely by trying to pull it downwards
The right clip on top might be a little hard to pop out: So be careful! It might help if you remove all the other clips first
Step 4
- next lose this screw as well
next lose this screw as well
Step 5
- You can use a plektrum to open up your device. You might will have to repeat the step multiple times. Make sure that you take care of every slit
- If you don’t have a plektrum just use your fingernails or something similar. But be careful it might will hurt you
You can use a plektrum to open up your device. You might will have to repeat the step multiple times. Make sure that you take care of every slit
If you don’t have a plektrum just use your fingernails or something similar. But be careful it might will hurt you
Step 6
- I suggest you to glue the spring on the second picture on the bottom. It will be easier for to reassemble the device later
I suggest you to glue the spring on the second picture on the bottom. It will be easier for to reassemble the device later
Step 7
- Remove all the marked screws in order to remove the lock mecanism
Remove all the marked screws in order to remove the lock mecanism
Step 8
- Pull out the placeholder
Pull out the placeholder
Step 9
- Remove also this screw and the plastic part which is held by it
Remove also this screw and the plastic part which is held by it
Step 10
- remove the lock
- Try to bend all the metall structures back into their right shape
- But pay attention that the metall doesn’t break!
remove the lock
Try to bend all the metall structures back into their right shape
But pay attention that the metall doesn’t break!
Step 11
- This spring snaps out very easy so pay attention that it is still inplace before you assemble every thing again
- Watch out for the tape! Make sure that it is covering the cables and make also sure that the cables are on the right place
This spring snaps out very easy so pay attention that it is still inplace before you assemble every thing again
Watch out for the tape! Make sure that it is covering the cables and make also sure that the cables are on the right place
Reverse those steps to reassemble the device
Cancel: I did not complete this guide.
One other person completed this guide.
Jonas Braun is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Jonas Braun
Author
with 1 other contributor
Jonas Braun
Member since: 02/03/2021
289 Reputation
1 Guide authored
Badges:
5
+2 more badges
