Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Keyboard
- 4 steps
Flags
0
BackLenovo Thinkpad Twist s230u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Use a Philips #1 screwdriver to remove 2 screws on the bottom of the laptop.
Use a Philips #1 screwdriver to remove 2 screws on the bottom of the laptop.
1024
Step 2
- Use a spudger to loosen the keyboard around the edges.
- Carefully push the keyboard towards the screen to unlatch it.
- Do not push too hard, as there are ribbon cables attached to the keyboard.
Use a spudger to loosen the keyboard around the edges.
Carefully push the keyboard towards the screen to unlatch it.
Do not push too hard, as there are ribbon cables attached to the keyboard.
Step 3
- Carefully lift up the keyboard to access the wires underneath.
- Be careful not to break the ribbon cables attached underneath.
Carefully lift up the keyboard to access the wires underneath.
Be careful not to break the ribbon cables attached underneath.
Step 4
- Open the small black flap on each of the ribbon cables. It should lift with a slight effort.
- Pull out the ribbon cables and remove the keyboard from the device.
Open the small black flap on each of the ribbon cables. It should lift with a slight effort.
Pull out the ribbon cables and remove the keyboard from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Arthur McPeak
Member since: 01/14/2020
664 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Embry-Riddle Aeronautical University, Team S1-G3, Cromer Twal Spring 2020
Member of Embry-Riddle Aeronautical University, Team S1-G3, Cromer Twal Spring 2020
ERAU-CROMER TWAL-S20S1G3
3 Members
6 Guides authored
