Difficulty

Easy

Steps

2

Time Required

                          5 - 8 minutes

Sections

1

  • Back Panel
  • 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackLenovo ThinkPad T560

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The back panel covers most of the inside components of the Lenovo Thinkpad T560. As a result, removing the back panel is often a prerequisite step for replacing other components.

Before removing the back panel, turn off your laptop and disconnect it from any external power sources. Then, make sure to remove the external battery first. This is done by clicking the two switches inward that are on the sides of the external battery, and then sliding the external battery from the laptop. This laptop is missing the external battery so we aren’t able to show you the process.

What you need

Step 1

              Back Panel
  • Before you begin this guide, make sure to disable the internal battery, power down the device and disconnect from any external power sources.
  • The external battery should be removed prior to back panel disassembly however this device doesn’t have one so we aren’t able to show the process.
  • Using the Phillips #0 screwdriver, remove the eight 7 mm screws holding the back panel to the T560.

Before you begin this guide, make sure to disable the internal battery, power down the device and disconnect from any external power sources.

The external battery should be removed prior to back panel disassembly however this device doesn’t have one so we aren’t able to show the process.

Using the Phillips #0 screwdriver, remove the eight 7 mm screws holding the back panel to the T560.

1024

Step 2

  • Use the iFixit opening tool to pry the back panel off your T560.
  • Work your way around the perimeter of the device to undo the clips and detach the back panel.

Use the iFixit opening tool to pry the back panel off your T560.

Work your way around the perimeter of the device to undo the clips and detach the back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Jackson Reynolds

Member since: 02/27/2022

499 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Clemson, Team 1-3, Hunter Spring 2022                        

                                                  Member of Clemson, Team 1-3, Hunter Spring 2022 



                    CLEM-HUNTER-S22S1G3                     


                                            5 Members                     


                                            5 Guides authored