Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

  • Back Cover
  • 4 steps

Flags

0

  • BackLenovo ThinkPad T490s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Loosen the back screws               
  • For your safety, discharge the battery below 25% and power down your device before disassembly.
  • Use your Phillips #1 screwdriver to fully loosen the five screws on the back cover.
  • These screws are captive—they won’t come out after being unscrewed.

For your safety, discharge the battery below 25% and power down your device before disassembly.

Use your Phillips #1 screwdriver to fully loosen the five screws on the back cover.

These screws are captive—they won’t come out after being unscrewed.

1024

Step 2

              Release the clips               
  • Orient your laptop so that the screen’s silver hinges are closest to you.
  • Insert an opening pick between the back cover and the device body near a hinge corner.
  • Pry upward to release the clips holding the cover. Listen for a loud click when each clip releases.

Orient your laptop so that the screen’s silver hinges are closest to you.

Insert an opening pick between the back cover and the device body near a hinge corner.

Pry upward to release the clips holding the cover. Listen for a loud click when each clip releases.

Step 3

  • Insert your opening pick between the cover and the device body at the other hinge corner.
  • Pry upward to release additional retaining clips.

Insert your opening pick between the cover and the device body at the other hinge corner.

Pry upward to release additional retaining clips.

Step 4

              Remove the back cover               
  • Grab the front edge of the cover and lift it away from you.
  • There may be additional clips holding the cover in place. These remaining clips will release easily as you remove the cover.

Grab the front edge of the cover and lift it away from you.

There may be additional clips holding the cover in place. These remaining clips will release easily as you remove the cover.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad answers community for help.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Clay Eickemeyer                     

Member since: 09/19/2022

14,946 Reputation

                                      125 Guides authored                  



                       Badges:
                       27







                                                        +24 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored