Difficulty

Moderate

Steps

10

Time Required

                          20 - 30 minutes

Sections

3

  • Bottom Cover
  • 3 steps
  • Battery
  • 2 steps
  • Speaker
  • 5 steps

Flags

0

  • BackLenovo ThinkPad T480s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If your laptop isn’t producing sound, or if the sound is distorted or intermittent, your speakers may be faulty. Be sure to troubleshoot any speaker-related issues before attempting to replace them.

Make sure to disable the internal battery, power down your device, and disconnect from any external power sources before you begin.

What you need

Step 1

              Bottom Cover
  • Disable the battery, power down the device, and unplug the power adapter from your device before proceeding/beginning the guide.
  • Loosen the six captive screws with a Phillips #1 screwdriver.

Disable the battery, power down the device, and unplug the power adapter from your device before proceeding/beginning the guide.

Loosen the six captive screws with a Phillips #1 screwdriver.

1024

Step 2

  • Remove the bottom cover with an opening tool.
  • Start from the top edge near the hinge and work your way along the edge until all of the clips are unsnapped.

Remove the bottom cover with an opening tool.

Start from the top edge near the hinge and work your way along the edge until all of the clips are unsnapped.

Step 3

  • Lift the bottom cover off.

Lift the bottom cover off.

Step 4

              Battery
  • Use the Phillips #1 screwdriver to remove four 4.5mm screws that hold the battery down to the mid frame.

Use the Phillips #1 screwdriver to remove four 4.5mm screws that hold the battery down to the mid frame.

Step 5

  • Lift the battery near the connector and remove it from the system.

Lift the battery near the connector and remove it from the system.

Step 6

              Speaker
  • Disconnect the speaker cable from the motherboard using a connector puller or spudger.

Disconnect the speaker cable from the motherboard using a connector puller or spudger.

Step 7

  • Using a Phillips #1 screwdriver, remove two 4.8 mm screws from the speaker on the right side.

Using a Phillips #1 screwdriver, remove two 4.8 mm screws from the speaker on the right side.

Step 8

  • Using a Phillips #1 screwdriver, remove two 4.8 mm screws from the speaker on the left side.

Using a Phillips #1 screwdriver, remove two 4.8 mm screws from the speaker on the left side.

Step 9

  • Use the spudger to disconnect the hall sensor connector.

Use the spudger to disconnect the hall sensor connector.

Step 10

  • Lift the speakers up.
  • Disconnect the cable speakers from the routing.
  • Remove the speakers from the system.

Lift the speakers up.

Disconnect the cable speakers from the routing.

Remove the speakers from the system.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

Author

                    Sarah Westberg

Member since: 03/11/2019

16,818 Reputation

                                      65 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored