Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

1

  • Screen Display
  • 5 steps

Flags

0

  • BackLenovo Thinkpad T450s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen Display
  • Open the device so that it is laying flat
  • Turn off device before starting

Open the device so that it is laying flat

Turn off device before starting

1024

Step 2

  • Pry the bottom right corner of the screen’s border and gently peel off the adhesive screen cover
  • You will find a sticky adhesive under the screen border. Be gentle when pulling it off and take your time to insure that you do not damage it.

Pry the bottom right corner of the screen’s border and gently peel off the adhesive screen cover

You will find a sticky adhesive under the screen border. Be gentle when pulling it off and take your time to insure that you do not damage it.

Step 3

  • Unscrew the screws from each corner of the screen

Unscrew the screws from each corner of the screen

Step 4

  • Slowly lean the computer forward so that the screen gently falls into your hand

Slowly lean the computer forward so that the screen gently falls into your hand

Step 5

  • Unplug the cord that connects the screen to the rest of the computer
  • Carefully use a metal prying tool to disconnect the two metal prong ends underneath the tape.

Unplug the cord that connects the screen to the rest of the computer

Carefully use a metal prying tool to disconnect the two metal prong ends underneath the tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Hayden Hausman

Member since: 01/17/2019

544 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S2-G3, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G3, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G3                     


                                            5 Members                     


                                            6 Guides authored

Geoff Kennedy - May 20, 2020

Reply

there is a step where you remove a simple harness which requires a spudger to de-clip it from the main frame of the laptop, but I gotta say that this walkthrough REALLY was the big difference maker for me in feeling like I could do this job. THANK YOU!!!!!

Ben Moran - Jun 14, 2020

Reply

Just confirming the missing step: it happens after the unscrewing. Thanks.