Lenovo Thinkpad T450S Bottom Panel Removal Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Battery
• 3 steps
• Lenovo Thinkpad T450s Bottom Panel Removal
• 2 steps

Flags

0

• BackLenovo Thinkpad T450s

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off device before starting
• Flip the laptop upside down so you have access to the battery.

Turn off device before starting

Flip the laptop upside down so you have access to the battery.

1024

Step 2

• Slide lock button 1 to the unlock position and gently slide away from your body.

Slide lock button 1 to the unlock position and gently slide away from your body.

Step 3

• Slide lock button 2 to the unlock position and continue gently sliding until the battery is removed.

Slide lock button 2 to the unlock position and continue gently sliding until the battery is removed.

Step 4

              Lenovo Thinkpad T450s Bottom Panel Removal               

• Flip the device over and lay it down with the underside facing upwards.
• Unscrew all 8 screws. While they should not come out completely, in some cases, the plastic retaining washers may come off of one or more of the screws, allowing them to come out completely. - should this happen, look for a loose, tiny black plastic washer once the case is open. It’s possible, in some cases, to reattach the retaining washer.

Flip the device over and lay it down with the underside facing upwards.

Unscrew all 8 screws. While they should not come out completely, in some cases, the plastic retaining washers may come off of one or more of the screws, allowing them to come out completely. - should this happen, look for a loose, tiny black plastic washer once the case is open. It’s possible, in some cases, to reattach the retaining washer.

Step 5

• Pry the bottom from the computer until it pops out.
• In some cases, the vented side of the case may cling to the heat sink; appears to be adhesive. Take care when separating.

Pry the bottom from the computer until it pops out.

In some cases, the vented side of the case may cling to the heat sink; appears to be adhesive. Take care when separating.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Hayden Hausman                     

Member since: 01/17/2019

544 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team S2-G3, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G3, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G3                     


                                            5 Members                     


                                            6 Guides authored