Difficulty
Moderate
Steps
10
Time Required
6 minutes
Sections
3
- Battery
- 3 steps
- Back Cover
- 3 steps
- Fan
- 4 steps
Flags
0
BackLenovo ThinkPad T440p
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop so that the back is facing up.
Flip the laptop so that the back is facing up.
1024
Step 2
- Slide the battery latches to the unlocked position.
Slide the battery latches to the unlocked position.
Step 3
- Slide the battery pack out of the battery slot.
Slide the battery pack out of the battery slot.
Step 4
Back Cover
- Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover.
Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover.
Step 5
- Slide down the back cover.
Slide down the back cover.
Step 6
- Remove the back cover.
Remove the back cover.
Step 7
Fan
- Using the spudger detach the cable that is connected to the computer.
Using the spudger detach the cable that is connected to the computer.
Step 8
- Remove the tape that is over the cable.
Remove the tape that is over the cable.
Step 9
- Screws are attached to the heat sink. Do not try to remove them; just have the screws loosened.
- Unscrew the four screws that are attached to the heat sink by using a Phillips #0 screwdriver.
Screws are attached to the heat sink. Do not try to remove them; just have the screws loosened.
Unscrew the four screws that are attached to the heat sink by using a Phillips #0 screwdriver.
Step 10
- Remove the fan.
Remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Christian Abad
Member since: 03/20/2019
1,252 Reputation
7 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team S6-G5, Peak Spring 2019
Member of UMass Dartmouth, Team S6-G5, Peak Spring 2019
UMASSD-PEAK-S19S6G5
3 Members
7 Guides authored