Difficulty

Moderate

Steps

11

Time Required

                          10 minutes

Sections

1

  • Display
  • 11 steps

Flags

0

  • BackLenovo ThinkPad T440p

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Removing the display isn’t that difficult and doesn’t take too long. You’ll just need a plastic opening tool, a Phillips #0 screwdriver, and just 10 minutes of your time.

What you need

Step 1

              Display
  • Flip the laptop over so that the bottom of the laptop is facing you.

Flip the laptop over so that the bottom of the laptop is facing you.

1024

Step 2

  • Slide each of the battery latches away from each other into the unlocked location.

Slide each of the battery latches away from each other into the unlocked location.

Step 3

  • Slide the battery out of the battery compartment.

Slide the battery out of the battery compartment.

Step 4

  • Flip the laptop over so that the top of the laptop faces you.

Flip the laptop over so that the top of the laptop faces you.

Step 5

  • Lift the lid of the laptop until the top of the lid is touching the ground.

Lift the lid of the laptop until the top of the lid is touching the ground.

Step 6

  • Carefully pry the display bezels away from the display using the plastic opening tool.
  • The edges on the underside of the bezel that touches the display may be sharp.

Carefully pry the display bezels away from the display using the plastic opening tool.

The edges on the underside of the bezel that touches the display may be sharp.

Step 7

  • Use the Phillips #0 screwdriver to remove the four 3mm display screws.

Use the Phillips #0 screwdriver to remove the four 3mm display screws.

Step 8

  • Carefully lift the display up and place it on the keyboard.
  • Don’t remove it from the laptop. There’s a cable still attached to it.

Carefully lift the display up and place it on the keyboard.

Don’t remove it from the laptop. There’s a cable still attached to it.

Step 9

  • Locate the latch attached to the display cable.
  • Grab the latch and flip it over so that it is facing away from you.

Locate the latch attached to the display cable.

Grab the latch and flip it over so that it is facing away from you.

Step 10

  • Gently remove the cable from the display by pulling it directly away from you.

Gently remove the cable from the display by pulling it directly away from you.

Step 11

  • Remove the display from the computer.

Remove the display from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 1 other contributor 


                    Rasheed Adam

Member since: 07/27/2020

337 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UW Tacoma, Team S1-G19, Cardinal Summer 2020                        

                                                  Member of UW Tacoma, Team S1-G19, Cardinal Summer 2020 



                    UWT-CARDINAL-SU20S1G19                     


                                            1 Member                     


                                            1 Guide authored

Noah - Jan 14, 2023

Reply

Easy peasy! Got a fresh 1080p IPS display into my ThinkPad thanks to this guide!