Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
2
- Battery
- 1 step
- RAM
- 2 steps
Flags
0
BackLenovo ThinkPad T410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over.
- Push and hold the locking switch to the left.
- Pull the battery out with your other hand.
Flip the laptop over.
Push and hold the locking switch to the left.
Pull the battery out with your other hand.
1024
Step 2
RAM
- Remove the single Phillips #0 screw grin the back panel.
- Pull the back panel off.
Remove the single Phillips #0 screw grin the back panel.
Pull the back panel off.
Step 3
- Pull the metal prongs at the side of the RAM away from each other.
- The RAM will pop out of its socket when done correctly.
- Pull the RAM out.
Pull the metal prongs at the side of the RAM away from each other.
The RAM will pop out of its socket when done correctly.
Pull the RAM out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Jared Quintana
Member since: 02/11/2018
437 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
University of North Texas, Team S4-G2, Thompson Spring 2018
Member of University of North Texas, Team S4-G2, Thompson Spring 2018
UNT-THOMPSON-S18S4G2
4 Members
6 Guides authored
