Difficulty
Easy
Steps
4
Time Required
15 minutes
Sections
1
- LCD Screen
- 4 steps
Flags
0
BackLenovo ThinkPad T400s
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
- Don’t apply pressure to the LCD Always hold the LCD from the right and left edgesDon’t apply any pressure to the lower part of the LCD
What you need
Step 1
LCD Screen
- Use a #0 Phillips head screwdriver to remove the two 3mm screws that hold the screen bezel in place.
Use a #0 Phillips head screwdriver to remove the two 3mm screws that hold the screen bezel in place.
1024
Step 2
- Using the plastic opening tool, gently pry off the plastic LCD screen frame around the entire perimeter.
- Be careful while prying the frame off, because the plastic tabs that hold it in may break.
Using the plastic opening tool, gently pry off the plastic LCD screen frame around the entire perimeter.
Be careful while prying the frame off, because the plastic tabs that hold it in may break.
Step 3
- Remove the LCD connector by pulling on the ribbon cable at the connection.
Remove the LCD connector by pulling on the ribbon cable at the connection.
Step 4
- Lift the LCD screen out to replace.
- Make sure to remove the screen with both hands and from opposite edges of the screen.
Lift the LCD screen out to replace.
Make sure to remove the screen with both hands and from opposite edges of the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 4 other contributors
Christopher Noone
Member since: 04/14/2015
235 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 6-18, Maness Spring 2015
Member of Cal Poly, Team 6-18, Maness Spring 2015
CPSU-MANESS-S15S6G18
4 Members
5 Guides authored
