Difficulty
Easy
Steps
7
Time Required
20 minutes
Sections
2
- Keyboard
- 5 steps
- CMOS Battery
- 2 steps
Flags
0
BackLenovo ThinkPad T400s
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Remove the Phillips #0-6mm screw.
- Lift up the back cover to the RAM cards.
Remove the Phillips #0-6mm screw.
Lift up the back cover to the RAM cards.
1024
Step 2
- Pull the lock for the baterry to the left to unlock.
- While holding the tab in the unlocked position, remove the battery.
Pull the lock for the baterry to the left to unlock.
While holding the tab in the unlocked position, remove the battery.
Step 3
- Remove the three Phillips #0-6mm screws on the back panel.
- These screws are marked with a keyboard symbol next to them.
Remove the three Phillips #0-6mm screws on the back panel.
These screws are marked with a keyboard symbol next to them.
Step 4
- Turn the computer over and open the lid.
- Wedge the small metal spudger between the palm rest and the keyboard.
Turn the computer over and open the lid.
Wedge the small metal spudger between the palm rest and the keyboard.
Step 5
- Lift up the keyboard, but be careful not to completely remove.
- Don’t lift the keyboard too quickly, there is a connector cable you must disconnect first.
- Wedge the small plastic opening tool underneath copper band and tilt back.
- Remove keyboard to replace.
Lift up the keyboard, but be careful not to completely remove.
Don’t lift the keyboard too quickly, there is a connector cable you must disconnect first.
Wedge the small plastic opening tool underneath copper band and tilt back.
Remove keyboard to replace.
Step 6
CMOS Battery
- Gently pull the back-up battery from underneath the front panel.
Gently pull the back-up battery from underneath the front panel.
Step 7
- Pull on the black connection piece and remove the back-up battery.
Pull on the black connection piece and remove the back-up battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Morgan Montalvo
Member since: 04/14/2015
652 Reputation
3 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 6-18, Maness Spring 2015
Member of Cal Poly, Team 6-18, Maness Spring 2015
CPSU-MANESS-S15S6G18
4 Members
5 Guides authored
