Difficulty
Moderate
Steps
6
Time Required
10 - 20 minutes
Sections
2
- Screen Assembly
- 4 steps
- Integrated Camera
- 2 steps
Flags
0
BackLenovo ThinkPad S431
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen Assembly
- Place an opening tool under the screen cover, and pop it off.
- Using a metal object to open fragile parts of your laptop could cause damage! Instead use the opening tool listed in the tools section above.
Place an opening tool under the screen cover, and pop it off.
Using a metal object to open fragile parts of your laptop could cause damage! Instead use the opening tool listed in the tools section above.
1024
Step 2
- Take off the 6 screws using the Philips head #1.
Take off the 6 screws using the Philips head #1.
Step 3
- Lift the screen out from the top.
Lift the screen out from the top.
Step 4
- Remove the connector located at the bottom of the back of the screen.
Remove the connector located at the bottom of the back of the screen.
Step 5
Integrated Camera
- Unplug the connector. It is located on the top of the screen attached to the camera assembly.
Unplug the connector. It is located on the top of the screen attached to the camera assembly.
Step 6
- Use the 3.0 flathead to lift up the silver camera strip.
Use the 3.0 flathead to lift up the silver camera strip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Mohammed AlManai
Member since: 04/05/2018
636 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Linn Benton Community College, Team S2-G2, Johnson Spring 2018
Member of Linn Benton Community College, Team S2-G2, Johnson Spring 2018
LBCC-JOHNSON-S18S2G2
4 Members
7 Guides authored
