Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Hard Disk Drive
- 5 steps
Flags
0
BackLenovo ThinkPad S431
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Disk Drive
- Remove the 8 screws that hold down the back panel using the Phillips #000 screwdriver.
Remove the 8 screws that hold down the back panel using the Phillips #000 screwdriver.
1024
Step 2
- Remove the two M2 x 3 mm, wafer-head, nylon-coated screws that hold down the hard drive assembly using the Phillips #0 screwdriver.
Remove the two M2 x 3 mm, wafer-head, nylon-coated screws that hold down the hard drive assembly using the Phillips #0 screwdriver.
Step 3
- Pull the hard drive assembly out with backside up.
Pull the hard drive assembly out with backside up.
Step 4
- Remove the four M3 x 3 mm, flat-head, nylon-coated screws on the side of the hard drive assembly using the Phillips #0 screwdriver.
Remove the four M3 x 3 mm, flat-head, nylon-coated screws on the side of the hard drive assembly using the Phillips #0 screwdriver.
Step 5
- Gently, remove the plastic cover with the blue strips.
Gently, remove the plastic cover with the blue strips.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Raylene Soto
Member since: 04/05/2018
284 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Linn Benton Community College, Team S2-G2, Johnson Spring 2018
Member of Linn Benton Community College, Team S2-G2, Johnson Spring 2018
LBCC-JOHNSON-S18S2G2
4 Members
7 Guides authored
