Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Battery
- 4 steps
Flags
0
BackLenovo ThinkPad P1 Gen2 Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove base cover
- Remove the 7 screws holding the base cover in place.
- Remove the base cover.
Remove the 7 screws holding the base cover in place.
Remove the base cover.
1024
Step 2
Unplug the battery
- Peel up the insulated sheet from the battery connector.
- Unplug the battery connector in the direction showed by the arrow.
Peel up the insulated sheet from the battery connector.
Unplug the battery connector in the direction showed by the arrow.
Step 3
Remove the battery screws
- Remove the two M2 × L4 mm, flat-head screws.
- Remove the two M2 × L5 mm, flat-head, screws.
Remove the two M2 × L4 mm, flat-head screws.
Remove the two M2 × L5 mm, flat-head, screws.
Step 4
Remove the battery
- Remove the battery.
Remove the battery.
To replace the battery & reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Max Kletskov
Member since: 04/22/2020
37,916 Reputation
15 Guides authored
Badges:
19
+16 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
Brad - Dec 11, 2022
Reply
Great Thank you for info
