Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
3
- Battery
- 2 steps
- Disassembly of the Back Panel
- 2 steps
- RAM
- 2 steps
Flags
0
BackLenovo ThinkPad E540
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
When replacing the RAM, it’s recommended to replace both at the same time.
What you need
Step 1
Battery
- Push the battery release switches away from each other.
Push the battery release switches away from each other.
1024
Step 2
- Remove the battery.
Remove the battery.
Step 3
Disassembly of the Back Panel
- Remove the three 1.2mm Phillips #00 screws from the bottom panel.
Remove the three 1.2mm Phillips #00 screws from the bottom panel.
Step 4
- Use a plastic opening tool to pry off the bottom panel.
Use a plastic opening tool to pry off the bottom panel.
Step 5
RAM
- Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.
- These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.
These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
Step 6
- Pull the RAM out of the laptop.
Pull the RAM out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Timothy Sumner
Member since: 02/14/2018
1,010 Reputation
8 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S2-G5, Nance Spring 2018
Member of USF Tampa, Team S2-G5, Nance Spring 2018
USFT-NANCE-S18S2G5
4 Members
8 Guides authored
