Lenovo Tab S8 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 minutes

Sections

Battery
3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackLenovo Tab S8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure the device is powered off.
Gently insert a spudger into one of the bottom corners between the screen and body case.
Slide the spudger along the inside of the crack in order to pry the case open.
Be careful of the small volume and power buttons when prying the case with the spudger. They are connected with small pieces of plastic that break easily.

Make sure the device is powered off.

Gently insert a spudger into one of the bottom corners between the screen and body case.

Slide the spudger along the inside of the crack in order to pry the case open.

Be careful of the small volume and power buttons when prying the case with the spudger. They are connected with small pieces of plastic that break easily.

1024

Step 2

After removing the cover, remove the M1.6 x 2 mm screw from the battery cable with the JIS J000 screwdriver.
Using screwdriver bits that do not fit in the screw head might strip the screw and render it unusable.
Remove the tape by gently scraping the edges up with the spudger.

After removing the cover, remove the M1.6 x 2 mm screw from the battery cable with the JIS J000 screwdriver.

Using screwdriver bits that do not fit in the screw head might strip the screw and render it unusable.

Remove the tape by gently scraping the edges up with the spudger.

Step 3

Before removing the battery, be sure to disconnect the ribbon cables underneath it. The cables might stick to the battery during removal and cause damage.
Gently lift the flaps on the four ZIF connectors to disconnect the cables.
Use the plastic card to gently pry the battery from the device.
There may be glue holding the battery to the device. Use the spudger to detach any glue while the battery is partially raised by the card.

Before removing the battery, be sure to disconnect the ribbon cables underneath it. The cables might stick to the battery during removal and cause damage.

Gently lift the flaps on the four ZIF connectors to disconnect the cables.

Use the plastic card to gently pry the battery from the device.

There may be glue holding the battery to the device. Use the spudger to detach any glue while the battery is partially raised by the card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      15 other people completed this guide.

Author

                                      with 5 other contributors

                    Temi Adegoke

Member since: 08/26/2015

417 Reputation

                                      1 Guide authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 3-6, Eyestone Fall 2015                        

                                                  Member of USF Tampa, Team 3-6, Eyestone Fall 2015 



                    USFT-EYESTONE-F15S3G6                     


                                            3 Members                     


                                            11 Guides authored

rithwik reddy gorripati - May 19, 2018

Where we can buy battery

Better Introduction#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Better Introduction

Introduction

What you need

Team