Difficulty
Easy
Steps
5
Time Required
40 minutes
Sections
2
- Battery
- 4 steps
- Rear Camera
- 1 step
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo Tab 4 8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Start at the microSD slot.
- Use the opening pick to slide underneath the back cover of the tablet.
- Slide the opening pick around the tablet until the back cover is off.
Start at the microSD slot.
Use the opening pick to slide underneath the back cover of the tablet.
Slide the opening pick around the tablet until the back cover is off.
1024
Step 2
- Remove the 8 screws with a Phillips #000 screwdriver [bit].
- There is a screw under the blue “s” sticker.
- Remove tape holding plate down.
- Use precision tweezers or your fingers to remove plate.
Remove the 8 screws with a Phillips #000 screwdriver [bit].
There is a screw under the blue “s” sticker.
Remove tape holding plate down.
Use precision tweezers or your fingers to remove plate.
Step 3
- Remove yellow tape.
- Use a spudger or plastic opening tool to remove the battery’s ribbon cable from the motherboard.
Remove yellow tape.
Use a spudger or plastic opening tool to remove the battery’s ribbon cable from the motherboard.
Step 4
- Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.
- Once the tabs are off, lift the battery up from the frame.
- Do not bend or puncture the battery.
Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.
Once the tabs are off, lift the battery up from the frame.
Do not bend or puncture the battery.
Step 5
Rear Camera
- Use a spudger to lift the rear camera press-fit connector up and free.
- Use tweezers to lift the rear camera out of the frame.
Use a spudger to lift the rear camera press-fit connector up and free.
Use tweezers to lift the rear camera out of the frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Ivan Chavez
Member since: 02/06/2019
776 Reputation
6 Guides authored
Badges:
8
+5 more badges
Team
Purdue University Northwest, Team S2-G4, Hingst Spring 2019
Member of Purdue University Northwest, Team S2-G4, Hingst Spring 2019
PNW-HINGST-S19S2G4
5 Members
6 Guides authored
