Lenovo Tab 4 8 Microsd Card Reader Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          55 minutes            

Sections

2

• Battery
• 4 steps
• MicroSD Card Reader
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo Tab 4 8

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Start at the microSD slot.
• Use the opening pick to slide underneath the back cover of the tablet.
• Slide the opening pick around the tablet until the back cover is off.

Start at the microSD slot.

Use the opening pick to slide underneath the back cover of the tablet.

Slide the opening pick around the tablet until the back cover is off.

1024

Step 2

• Remove the 8 screws with a Phillips #000 screwdriver [bit].
• There is a screw under the blue “s” sticker.
• Remove tape holding plate down.
• Use precision tweezers or your fingers to remove plate.

Remove the 8 screws with a Phillips #000 screwdriver [bit].

There is a screw under the blue “s” sticker.

Remove tape holding plate down.

Use precision tweezers or your fingers to remove plate.

Step 3

• Remove yellow tape.
• Use a spudger or plastic opening tool to remove the battery’s ribbon cable from the motherboard.

Remove yellow tape.

Use a spudger or plastic opening tool to remove the battery’s ribbon cable from the motherboard.

Step 4

• Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.
• Once the tabs are off, lift the battery up from the frame.
• Do not bend or puncture the battery.

Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.

Once the tabs are off, lift the battery up from the frame.

Do not bend or puncture the battery.

Step 5

              MicroSD Card Reader               

• There is a yellow tape holding the microSD card reader connector. Use tweezers to hold down the tape.
• Gently lift the tab on the microSD card reader’s ZIF connector, and gently pull the ribbon cable free.

There is a yellow tape holding the microSD card reader connector. Use tweezers to hold down the tape.

Gently lift the tab on the microSD card reader’s ZIF connector, and gently pull the ribbon cable free.

Step 6

• Lift the microSD card reader with tweezers or your fingers.

Lift the microSD card reader with tweezers or your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Ivan Chavez                     

Member since: 02/06/2019

776 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Purdue University Northwest, Team S2-G4, Hingst Spring 2019                        

                                                  Member of Purdue University Northwest, Team S2-G4, Hingst Spring 2019 



                    PNW-HINGST-S19S2G4                     


                                            5 Members                     


                                            6 Guides authored