Lenovo Tab 2 A8 Rear Facing Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          8 minutes

Sections

Removing the Back Panel
2 steps
Rear-Facing Camera
2 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackLenovo Tab 2 A8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the Back Panel

Place the tablet face down on a soft, stable surface that will protect the screen.
Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.
Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.
If the seal covering the screw has already been removed, please proceed to the next step in the process.
As the screw is small, you may wish to extract it using a pair of tweezers.

Place the tablet face down on a soft, stable surface that will protect the screen.

Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

If the seal covering the screw has already been removed, please proceed to the next step in the process.

As the screw is small, you may wish to extract it using a pair of tweezers.

1024

Step 2

Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.
Some force may be required initially to pry the back cover off.
Note that the button tabs for this device are loose inside the case and will fall out when opening.

Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

Some force may be required initially to pry the back cover off.

Note that the button tabs for this device are loose inside the case and will fall out when opening.

Step 3

              Rear-Facing Camera

Using a spudger, pry upward on the camera connector to free it from the motherboard.

Using a spudger, pry upward on the camera connector to free it from the motherboard.

Step 4

Use tweezers to grasp the camera connector and lift the camera out of its socket.

Use tweezers to grasp the camera connector and lift the camera out of its socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors

                    Tim Gales

Member since: 10/06/2015

478 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Eastern Washington University, Team 2-4, Plummer Fall 2015                        

                                                  Member of Eastern Washington University, Team 2-4, Plummer Fall 2015 



                    EWU-PLUMMER-F15S2G4                     


                                            4 Members                     


                                            13 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team