Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

2

  • Case
  • 1 step
  • Battery
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLenovo Tab 2 A7-20F

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Note: Before removing the battery, make sure that the device is shut down completely and that the charger is disconnected. Make sure that your hands are dry and that you have discharged any built up static charge by touching a good ground source. This will help to avoid damaging any electric components.

What you need

Step 1

              Case               
  • Starting at any point along the seam of the case carefully pry it open with the metal spudger, slowly working your way around the outside until the case can come apart.

Starting at any point along the seam of the case carefully pry it open with the metal spudger, slowly working your way around the outside until the case can come apart.

1024

Step 2

              Battery               
  • The battery is connected to the motherboard by the thin wire shown here.
  • Pull up gently on the yellow tape to access the connector.

The battery is connected to the motherboard by the thin wire shown here.

Pull up gently on the yellow tape to access the connector.

Step 3

  • Gently detach the connector from the motherboard by pulling up on it.

Gently detach the connector from the motherboard by pulling up on it.

Step 4

  • There is double-sided tape inside the case.
  • Use the spudger tool to loosen the bond of the adhesive from the double sided tape.
  • Separate the battery from the case.

There is double-sided tape inside the case.

Use the spudger tool to loosen the bond of the adhesive from the double sided tape.

Separate the battery from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Thanh                     

Member since: 09/21/2017

341 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Washington State, Team S5-G111, Phelps-Hillen Fall 2017                        

                                                  Member of Washington State, Team S5-G111, Phelps-Hillen Fall 2017 



                    WSU-PHELPS-HILLEN-F17S5G111                     


                                            4 Members                     


                                            6 Guides authored