Lenovo Slim Dvd Burner Db65 Disc Tray Locking Mechanism Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

1

• Disc Tray Locking Mechanism
• 7 steps

Flags

0

• BackLenovo Slim DVD Burner DB65

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disc Tray Locking Mechanism               

• Flip the unit over so that way the bottom is facing you.
• Remove the two black 7.6mm Phillips #0 screws from the bottom cover.

Flip the unit over so that way the bottom is facing you.

Remove the two black 7.6mm Phillips #0 screws from the bottom cover.

1024

Step 2

• Use the iFixit Opening Tool to gently pry the unit apart to gain access to the interior.
• If the top seems stuck, run the iFixit Opening Tool along the edge while simultaneously pulling up on the top with your fingers. Continue to apply pressure until it opens completely.

Use the iFixit Opening Tool to gently pry the unit apart to gain access to the interior.

If the top seems stuck, run the iFixit Opening Tool along the edge while simultaneously pulling up on the top with your fingers. Continue to apply pressure until it opens completely.

Step 3

• Open the device tray by inserting a paper clip into the eject hole.

Open the device tray by inserting a paper clip into the eject hole.

Step 4

• Turn the unit over and remove the two silver 3mm Phillips #0 screws from the aluminum cover.

Turn the unit over and remove the two silver 3mm Phillips #0 screws from the aluminum cover.

Step 5

• Lift the silver coverup to expose the internal components.
• If the cover seems stuck gently pull up on one edge. The cover should remove completely after one side is free.

Lift the silver coverup to expose the internal components.

If the cover seems stuck gently pull up on one edge. The cover should remove completely after one side is free.

Step 6

• Remove the single 3mm Phillips #0 screw.

Remove the single 3mm Phillips #0 screw.

Step 7

• Lift and remove the silver tray locking mechanism by detaching the spring which is hooked on the white plastic internal component.
• Be careful when removing this mechanism—the spring is delicate.

Lift and remove the silver tray locking mechanism by detaching the spring which is hooked on the white plastic internal component.

Be careful when removing this mechanism—the spring is delicate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Matthew Green                     

Member since: 07/05/2018

337 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       IUPUI, Team S2-G1, Harley Summer 2018                        

                                                  Member of IUPUI, Team S2-G1, Harley Summer 2018 



                    IUPUI-HARLEY-SU18S2G1                     


                                            3 Members                     


                                            2 Guides authored                     

RuCharlz - Feb 12, 2020

Reply

Hey there, I tried to fix mine, but 3 tiny black springs came from nowhere, and now I dunno what should I do with them.