Difficulty

Easy

Steps

5

Time Required

                          2 minutes

Sections

2

  • Battery
  • 4 steps
  • Speakers
  • 1 step

Flags

0

  • BackLenovo Miix 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back cover of the tablet by inserting a nylon or metal spudger in the small hole between the screen and rear cover near the volume button. Slide the tool along the edge of the tablet to release the internal clasps.
  • You should have to apply a good amount of force, but pry carefully in order to avoid damaging the clasps or the internals.

Remove the back cover of the tablet by inserting a nylon or metal spudger in the small hole between the screen and rear cover near the volume button. Slide the tool along the edge of the tablet to release the internal clasps.

You should have to apply a good amount of force, but pry carefully in order to avoid damaging the clasps or the internals.

1024

Step 2

  • Unscrew the six 3mm screws surrounding the battery dock using a Phillips #0 screwdriver.

Unscrew the six 3mm screws surrounding the battery dock using a Phillips #0 screwdriver.

Step 3

  • Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.

Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.

Step 4

  • Remove the battery by prying up with your fingers or a plastic opening tool.

Remove the battery by prying up with your fingers or a plastic opening tool.

Step 5

              Speakers
  • Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force.
  • To properly remove the speakers from the casing, push gently left until it shifts, then pull directly up.

Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force.

To properly remove the speakers from the casing, push gently left until it shifts, then pull directly up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Diana Chiu

Member since: 07/14/2014

654 Reputation

                                      4 Guides authored                  



                       Badges:
                       26







                                                        +23 more badges

Team

                       Kid fixers                        

                                                  Member of Kid fixers 



                    Community                     


                                            134 Members                     


                                            150 Guides authored