Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

2

  • Back Cover
  • 2 steps
  • Fan
  • 4 steps

Flags

0

  • BackLenovo Legion Y530-15ICH

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Ensure the device is powered off.
  • Use a PZ00 screwdriver bit to remove the eleven screws securing the back cover.
  • Five 7 mm screws
  • Six 4 mm screws

Ensure the device is powered off.

Use a PZ00 screwdriver bit to remove the eleven screws securing the back cover.

Five 7 mm screws

Six 4 mm screws

1024

Step 2

  • Carefully pry the back cover off the computer using an opening pick.
  • Start at the corner of the laptop and work your way around the side. Gently pull up on the cover until it detaches.

Carefully pry the back cover off the computer using an opening pick.

Start at the corner of the laptop and work your way around the side. Gently pull up on the cover until it detaches.

Step 3

              Fan
  • Use a JIS #1 screwdriver to loosen the five spring screws located at the middle of the fan piece.
  • Remove the plastic covering after the screws have been loosened.
  • Spring screws will stay attached to the cover.

Use a JIS #1 screwdriver to loosen the five spring screws located at the middle of the fan piece.

Remove the plastic covering after the screws have been loosened.

Spring screws will stay attached to the cover.

Step 4

  • Use a JIS #1 screwdriver to remove four 4mm screws securing the fans to the device.

Use a JIS #1 screwdriver to remove four 4mm screws securing the fans to the device.

Step 5

  • Unplug the wires connecting the two fans to the motherboard.
  • When doing this, tug carefully from side to side.

Unplug the wires connecting the two fans to the motherboard.

When doing this, tug carefully from side to side.

Step 6

  • Lift the fans out of their positions and remove them from the device.

Lift the fans out of their positions and remove them from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Kaylie Klausing

Member since: 02/07/2020

743 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S7-G1, Regan Winter 2020                        

                                                  Member of Cal Poly, Team S7-G1, Regan Winter 2020 



                    CPSU-REGAN-W20S7G1                     


                                            4 Members                     


                                            11 Guides authored

Daniel Perez - Nov 5, 2020

Reply

Thank you! Very clear and well photographed :)

Ivan Ramljak - Nov 16, 2020

Reply

Any recommended stores for the replacement fans?

Skyler Boyle - Jan 25, 2022

Reply

Worked like a charm, thank you!!

peters pelumi - Jun 12, 2022

Reply

where can i get a good replacement please