Difficulty
Easy
Steps
2
Time Required
2 - 5 minutes
Sections
1
- Base Panel
- 2 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo Legion Y520-15IKBN
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Base Panel
- Shut down and unplug your device before proceeding.
- Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.
Shut down and unplug your device before proceeding.
Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.
1024
Step 2
- Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.
- To get a better grip you may want to open the laptop slightly.
- Lift the bottom panel off of the chassis.
- During reassembly, make sure that the bottom panel clicks back into place on all four sides of the laptop.
Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.
To get a better grip you may want to open the laptop slightly.
Lift the bottom panel off of the chassis.
During reassembly, make sure that the bottom panel clicks back into place on all four sides of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Connor Bassolino
Member since: 03/29/2022
1,562 Reputation
8 Guides authored
Badges:
16
+13 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
