Difficulty
Moderate
Steps
10
Time Required
5 - 10 minutes
Sections
1
- Back Cover
- 10 steps
Flags
0
BackLenovo Legion 5 Pro 16ACH6H
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before you perform this repair, be sure to completely power off and unplug your laptop. Make sure the laptop is not in standby, sleep, or hibernation mode.
What you need
Step 1
Back cover removal
- Use a Phillips screwdriver to remove the following ten screws securing the back cover to frame:
- Six 12.7 mm PH00 screws
- Four 4.2 mm PH00 screws
Use a Phillips screwdriver to remove the following ten screws securing the back cover to frame:
Six 12.7 mm PH00 screws
Four 4.2 mm PH00 screws
1024
Step 2
Release the front clips
- Insert the rounded edge of an opening pick between the back cover and the frame in the lower right corner.
Insert the rounded edge of an opening pick between the back cover and the frame in the lower right corner.
Step 3
- Angle the pick to about 45˚.
- Slide the pick along the front edge to release the clips securing the back cover to the frame.
Angle the pick to about 45˚.
Slide the pick along the front edge to release the clips securing the back cover to the frame.
Step 4
Release the right clips
- Insert the rounded edge of an opening pick between the back cover and the frame on the right edge.
- Angle the pick to about 30˚ and slide down the right edge until you reach the plastic vents on the side.
Insert the rounded edge of an opening pick between the back cover and the frame on the right edge.
Angle the pick to about 30˚ and slide down the right edge until you reach the plastic vents on the side.
Step 5
Release the left clips
- Repeat the same procedure on the left edge to release the clips.
Repeat the same procedure on the left edge to release the clips.
Step 6
Release the right vent clips
- Position the laptop vertically so you can easily access the plastic vents.
- Slide the rounded edge of an opening pick between the frame and the plastic vents on the right side near the USB-A port.
- Rotate the pick so that it is positioned on top of the plastic vents.
Position the laptop vertically so you can easily access the plastic vents.
Slide the rounded edge of an opening pick between the frame and the plastic vents on the right side near the USB-A port.
Rotate the pick so that it is positioned on top of the plastic vents.
Step 7
- Push the pick between the frame and plastic vents.
- Slide the pick along the top edge of the plastic vents to release the clips.
Push the pick between the frame and plastic vents.
Slide the pick along the top edge of the plastic vents to release the clips.
Step 8
Release the left vent clips
- Slide the rounded edge of an opening pick between the frame and the plastic vents on the left side near the USB-C port.
- Rotate the pick so that it is positioned on top of the plastic vents.
Slide the rounded edge of an opening pick between the frame and the plastic vents on the left side near the USB-C port.
Step 9
Step 10
Remove the back cover
- Lift the back cover up and remove it from the chassis.
- During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.
Lift the back cover up and remove it from the chassis.
During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo Legion answers community for help.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Chayton Ritter
Member since: 08/21/2020
4,850 Reputation
26 Guides authored
Badges:
29
+26 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
