Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
1
- Battery
- 6 steps
Flags
0
BackLenovo IdeaTab S6000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the speaker screens by working them loose with a plastic opening tool. You may need to first loosen them with tweezers or a craft knife.
- These screens are held in place by glue that is hard to remove. Please take your time to ensure that that this step is done correctly.
Remove the speaker screens by working them loose with a plastic opening tool. You may need to first loosen them with tweezers or a craft knife.
These screens are held in place by glue that is hard to remove. Please take your time to ensure that that this step is done correctly.
1024
Step 2
- Remove the screws from both of the spots that were covered.
Remove the screws from both of the spots that were covered.
Step 3
- DO NOT USE A METAL TOOL FOR THIS.
- Go all around the casing, prying the screen away from the backing with the spudger.
- It will make a popping sound each time one of the lock tabs is disconnected.
- Take your time as you move all around the device when prying the backing off.
DO NOT USE A METAL TOOL FOR THIS.
Go all around the casing, prying the screen away from the backing with the spudger.
It will make a popping sound each time one of the lock tabs is disconnected.
Take your time as you move all around the device when prying the backing off.
Step 4
- Pull off the plastic that is covering the battery cable.
Pull off the plastic that is covering the battery cable.
Step 5
- Using either the plastic opening tool or your fingers, gently pull on both sides of the plug to release it.
Using either the plastic opening tool or your fingers, gently pull on both sides of the plug to release it.
Step 6
- Remove the battery by grabbing the tab shown and pulling up.
- The battery is held to the device by adhesive. Pull the battery up from the tab and it will lift out with a bit of effort.
Remove the battery by grabbing the tab shown and pulling up.
The battery is held to the device by adhesive. Pull the battery up from the tab and it will lift out with a bit of effort.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
Author
with 5 other contributors
Josiah Speed
Member since: 09/22/2014
944 Reputation
4 Guides authored
Badges:
16
+13 more badges
Team
USF Tampa, Team 10-4, Brown Fall 2014
Member of USF Tampa, Team 10-4, Brown Fall 2014
USFT-BROWN-F14S10G4
4 Members
10 Guides authored
Shelby Greenwall - Feb 18, 2015
Reply
Does this guide apply to all variants of this model? The S6000L frame doesn’t seem to pop away from the screen assembly the same way. Is there adhesive in any of the models?
Niyi Popoola - Apr 3, 2016
Reply
Can you recommend a professional who can help replace my Lenovo S600 battery.
Joachim Keinert - Apr 24, 2016
Reply
The original Lenovo battery comes with the metal frame. In my case, the screw holes of the metal frame did not fit the screw holes of the base. Thus, I just pulled the new battery off its metal frame and just replaced the battery.
steve - Oct 8, 2016
Reply
Great information. Thanks, you’re a peach!
acldebashis - Jan 20, 2020
Reply
It was helpful.