Difficulty
Moderate
Steps
11
Time Required
20 minutes
Sections
3
- Back Cover
- 3 steps
- Battery
- 3 steps
- Screen
- 5 steps
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackLenovo Ideatab A1107
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Insert a plastic opener in-between the black back panel and the silver body of the tablet.
- Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.
Insert a plastic opener in-between the black back panel and the silver body of the tablet.
Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.
1024
Step 2
- Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.
Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.
Step 3
- Lift up and remove the interior casing to expose the inner components.
- Do not be alarmed if the volume button and lock button fall off when removing the interior casing.
Lift up and remove the interior casing to expose the inner components.
Do not be alarmed if the volume button and lock button fall off when removing the interior casing.
Step 4
Battery
- Use tweezers to remove the tape covering the battery’s wiring.
Use tweezers to remove the tape covering the battery’s wiring.
Step 5
- Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
- Do not use metal tools to remove the battery wire. They present the risk of electrocution.
- Use a plastic spudger tool to push the battery’s wire harness and disconnect it from the device.
Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
Do not use metal tools to remove the battery wire. They present the risk of electrocution.
Use a plastic spudger tool to push the battery’s wire harness and disconnect it from the device.
Step 6
- Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
- Wedge a plastic opening tool in between the battery and the internal components of the device.
- Use the plastic opener tool to remove the battery from its casing.
Wedge a plastic opening tool in between the battery and the internal components of the device.
Use the plastic opener tool to remove the battery from its casing.
Step 7
Screen
- Using you hands, lift off the digitizer.
Using you hands, lift off the digitizer.
Step 8
- Remove the three screws that are 2.0 mm in length and have a 5.25 mm head width with a Phillips #00 screwdriver.
Remove the three screws that are 2.0 mm in length and have a 5.25 mm head width with a Phillips #00 screwdriver.
Step 9
- Use a spudger to remove the plastic piece securing the zero insertion force (ZIF) cable connector.
- Use tweezers to grasp the ribbon cable, then pull the cable to disconnect it from the device.
Use a spudger to remove the plastic piece securing the zero insertion force (ZIF) cable connector.
Use tweezers to grasp the ribbon cable, then pull the cable to disconnect it from the device.
Step 10
- Locate the black electrical tape strip on the side of the device.
- Gently remove the tape from the device using the tweezers.
Locate the black electrical tape strip on the side of the device.
Gently remove the tape from the device using the tweezers.
Step 11
- After removing the electric tape, gently lift up the green control panel.
- Taking the tweezers, remove the ribbon cable from the control panel.
- Once the ribbon cable is removed from the panel, the display should separate with ease.
After removing the electric tape, gently lift up the green control panel.
Taking the tweezers, remove the ribbon cable from the control panel.
Once the ribbon cable is removed from the panel, the display should separate with ease.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Katherine Enders
Member since: 01/18/2017
445 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
Eastern Washington University, Team 2-2, Crane Winter 2017
Member of Eastern Washington University, Team 2-2, Crane Winter 2017
EWU-CRANE-W17S2G2
3 Members
10 Guides authored
