Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackLenovo Ideatab A1107

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Insert a plastic opener in-between the black back panel and the silver body of the tablet.
  • Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.

Insert a plastic opener in-between the black back panel and the silver body of the tablet.

Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.

1024

Step 2

  • Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.

Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.

Step 3

  • Lift up and remove the interior casing to expose the inner components.
  • Do not be alarmed if the volume button and lock button fall off when removing the interior casing.

Lift up and remove the interior casing to expose the inner components.

Do not be alarmed if the volume button and lock button fall off when removing the interior casing.

Step 4

              Battery
  • Use tweezers to remove the tape covering the battery’s wiring.

Use tweezers to remove the tape covering the battery’s wiring.

Step 5

  • Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
  • Do not use metal tools to remove the battery wire. They present the risk of electrocution.
  • Use a plastic spudger tool to push the battery’s wire harness and disconnect it from the device.

Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.

Do not use metal tools to remove the battery wire. They present the risk of electrocution.

Use a plastic spudger tool to push the battery’s wire harness and disconnect it from the device.

Step 6

  • Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
  • Wedge a plastic opening tool in between the battery and the internal components of the device.
  • Use the plastic opener tool to remove the battery from its casing.

Wedge a plastic opening tool in between the battery and the internal components of the device.

Use the plastic opener tool to remove the battery from its casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Mariah Scott

Member since: 01/17/2017

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Eastern Washington University, Team 2-2, Crane Winter 2017                        

                                                  Member of Eastern Washington University, Team 2-2, Crane Winter 2017 



                    EWU-CRANE-W17S2G2                     


                                            3 Members                     


                                            10 Guides authored