Lenovo Ideatab A1000L Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Battery
3 steps

Flags

BackLenovo IdeaTab A1000L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Be sure to power off your device before taking it apart.
Locate the small tab, marked with the lock symbol on the upper right hand of your IdeaTab above the volume control buttons. Use your fingernail to gently loosen this tab.
Use your Phillips #000 screwdriver and remove the 3.5mm screw and put it aside.
Using your blue, plastic opening tool, begin to gently pry the back panel away from the front panel starting by where the screw was.

Be sure to power off your device before taking it apart.

Locate the small tab, marked with the lock symbol on the upper right hand of your IdeaTab above the volume control buttons. Use your fingernail to gently loosen this tab.

Use your Phillips #000 screwdriver and remove the 3.5mm screw and put it aside.

Using your blue, plastic opening tool, begin to gently pry the back panel away from the front panel starting by where the screw was.

1024

Step 2

Locate the black back plate, above the battery.
Using a Phillips #000 screwdriver remove the 7 silver 3.5mm screws from the back plate.
Next, with the same screwdriver, remove the black 4.1mm screw.
Gently remove the back plate from the device.

Locate the black back plate, above the battery.

Using a Phillips #000 screwdriver remove the 7 silver 3.5mm screws from the back plate.

Next, with the same screwdriver, remove the black 4.1mm screw.

Gently remove the back plate from the device.

Step 3

Use the plastic opening tool to disconnect the battery wires from the system board. Slide your opening tool under the white plastic piece and pry it up.
Again, use the plastic opening tool to loosen the battery from the device by lifting up on the battery on all sides. This will detach the battery from the adhesive.
Gently place the battery aside.

Use the plastic opening tool to disconnect the battery wires from the system board. Slide your opening tool under the white plastic piece and pry it up.

Again, use the plastic opening tool to loosen the battery from the device by lifting up on the battery on all sides. This will detach the battery from the adhesive.

Gently place the battery aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.

Author

                                      with 2 other contributors

                    Peter Newell

Member since: 04/15/2014

627 Reputation

                                      2 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Cal Poly, Team 7-21, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 7-21, Regan Spring 2014 



                    CPSU-REGAN-S14S7G21                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team